High-pressure water scours grease, scale and roots from the pipe wall and restores the full diameter of your line.
A cable machine punches a hole through a clog. A hydro jetter does something different: it sends water at high pressure through a nozzle with jets that scour the whole circumference of the pipe, washing away grease, scale, sludge and fine roots and carrying them down the line. The pipe comes out looking like it did when it was new.
Jetting uses thousands of pounds of pressure per square inch, so the operator must match the pressure, the nozzle and the travel speed to the pipe size and material, and a camera inspection beforehand tells us whether a pipe is sound enough to jet. Done correctly, it is one of the most effective ways to clear and maintain a line.
Drag the handle to compare.
BeforeAfterRemoves buildup from the whole pipe wall.
No chemicals, just clean, pressurized water.
We check pipe condition before jetting and verify the result.
The right PSI and nozzle for your material and size.
Clean walls stay clear longer than a cable pass.
Perfect for restaurants and repeat-clog lines.
Every topic has its own page with signs, causes and fixes.
Pipe or methodHydro JettersTruck- and trailer-mounted jetters deliver the flow and pressure to clean pipes from 2 inches to large mains.Learn more 
Common problemGrease BuildupWarm grease goes down liquid and turns to a hard, waxy coating on the pipe wall, narrowing it…Learn more 
Common problemScale & CorrosionRust, scale and mineral deposits slowly shrink old drain lines until water has barely any room to flow.Learn more 
Common problemTree RootsFine roots find a crack or an open joint, then grow into a net that catches everything flowing…Learn more Choose pipe size, length and buildup and see a recommended nozzle, pressure range, passes and time estimate.
We ask a few questions, give you immediate tips and send the right equipment.
We look inside the pipe to find the cause, not just the symptom.
You see the findings and approve a price before work begins.
Cable, hydro jetting or repair, with the least disruption to your property.
A second camera pass confirms the line is clear and sound.
We explain what caused it and set up prevention so it does not return.
On sound pipe, correctly done, no. We inspect first, because a pipe that is already cracked or collapsed should be repaired rather than jetted.
A cable cuts through the middle of a clog. A jetter scours the whole wall, so it removes more and lasts longer.
Restaurants may jet every few months, and homes with repeat clogs often benefit from a yearly pass.
It removes fine roots and, with a cutting nozzle, larger ones, but roots grow back unless the entry point is repaired.
Sewer Line CleaningFrom the cleanout to the city main, we clear the whole building sewer and leave it flowing freely.Explore 
Root RemovalRoots find tiny cracks and joints, then fill the pipe. We cut them out, flush the line and…Explore 
Grease Trap CleaningKeep the health inspector happy and the kitchen drains flowing with scheduled grease interceptor pumping and cleaning.Explore 
Sewer Camera InspectionSee inside your pipes. A camera inspection finds roots, cracks, sags and breaks, and gives you video proof.Explore Tell us what is going on and we will call you back quickly.
Or call (615) 357-7797 to talk now.
